Non-Segregated Phase Busduct
– 600 V through 38 kV
– 1200 A through 5000 A
– Copper bus bar
– 130 degree Class B epoxy insulation
– Silver-plated contact surfaces
– Up to 63 kA short circuit withstand ratings 170 kA peak
– Aluminum, steel and stainlesssteel enclosures
– Indoor, outdoor and dust-tight construction
– Accordance with ANSI/IEEE standard C37.23
– ANSI / NEMA / EEMAC / UL / CSA Stds
– Type test of seismic withstand capability
– Protects and monitors low voltage electrical distribution systems
– Leader in product innovations
– Patented designs up to 600V, 10000A continous current
– Major customers include Heavy Industrial, Commercial Users with critical processes & Critical Power / UPS OEMs
– Highest interrupting ratings up to 200kAIC
– Short time 30 cycle withstand ratings up to100kA
– Four ACB in one cell cubicle
– Arc resistance type 2B as optional
– ANSI / NEMA / EEMAC / UL / CSA Stds
– Type test of seismic withstand capability
– Protects and monitors Low Voltage Electrical Distribution Systems
– Leader in product innovations
– Major customers include Heavy Industrial, Commercial Users with critical processes, & Critical Power / UPS OEMs
– Highest interrupting ratings up to 200kAIC
– Compact dimension:
20”W x 90”H x 16” or 21”D (Front Type)
20”W 90”H 21”D (B k t B k T )20”W x 90”H x 21”D (Back to Back Type)
– Intelegence system as optional
– Arc resistance type 2B as optional
– Enclosures: Indoor, Outdoor Aisle-less, Outdoor Sheltered Aisle, Outdoor Common Aisle
Based on the design concept of full insulation and fully sealed, all primary parts within RVAC RMU are fully sealed inside the stainless-steel main enclosure, protect to against condensation and external contaminated environment; the protection degree of the main tank body is up to IP68, equipped with Cooper’s waterproofing touchable cable bond, which can provide effective protection against accidental flood in rainy climate.
– Rated Voltage upto 24kv
– Rated current up to 630A
– Rated interrupting current up to 20kA/3s
– Modular cubicle type
– Capacitive voltage detection system for verification of safe isolation from supply
– Feeder earthing by means of make-proof earthing switch
– Low power loss, low maintenance spending, ensuring more reasonable cost investment
– In normal working conditions, gas leakage rate of lower than 1% ensures more than 30 years life-cycle
– Indoor or Outdoor
The Motor Control Center xENERGY has been realized to the pricese end of meet such requirements. It may be used for :
– Rated voltage up to 690 VAC, 50/60 Hz
– Rated current up to 5550A
– Rated short time current up to 100 kA at 1 sec
– Form of separation up to Form 4B
– Degree protection up to IP 55
The xENERGY has been designed in compliance with the following standard met IEC 61439-1-2. Our product already done pass test by DEKRA KEMA international cerificate
XIRIA switchgear is a new generation of environmental friendly Ring Main Unit Switchgear for applications up to 24 Kv Medium Voltage Distribution networks. Sustainability becomes more and more important, This criterion has been taken as a starting point for the design in terms Of production and for the entire service life of the switchgear.
Xiria switchgear is manufactured and tested in accordance with the procedures As laid down in ISO 9001-2000. KEMA Registered Quality B.V. checks periodically That these standards are adhered to. In addition, Electric B.V. adheres to ISO 14001.
The system is metalenclosed and air insulated, equipped with load-break switches and circuit breakers for 12 kV-20kA and 24 kV-16kA networks. The nominal current of the load break switch is 630 A. The nominal current of the circuit-breaker is 200 or 500 A.
Key Advantage :
– Maintenance Free
– Low Building Cost
– Internal Arc Proof
– Easy to Install
– Environment safety
– Remote Control Facility
– Highhest quality, Most reliable
– Fully Insulated, Maximum IP 67
– Very compact Design
– Safety